碰撞角对爆炸复合材料界面状态的影响

复合材料界面状态是衡量复合质量优劣的主要评定因素之一,焊接参数和界面状态之间存在着紧密的联系。为了获得理想的复合质量,必须正确选择爆炸焊接参数。本文在实验的基础上,通过理论研究和数值计算,探讨了爆炸复合的力学模型及物理机制,验证了碰撞角对再入射流的质量(或再入射流的厚度)和爆炸复合材料界面状态存在的影响,得出了波形的变化趋势与碰撞角的变化趋势相一致的结论,同时确立了波形参数和碰撞角的半定量表达式,拓展和深化了爆炸复合的研究领域,丰富和发展了爆炸复合的成波机理,从而能够更好地指导工程应用,减少工程损耗,提高复合质量和工作效率。     

Optical pulse shaper with integrated slab waveguide for arbitrary waveform generation using optical gradient force

Integrated optical pulse shaper opens up possibilities for realizing the ultra high-speed and ultra wide-band linear signal processing with compact size and low power consumption. We propose a silicon monolithic integrated optical pulse shaper using optical gradient force, which is based on the eight-path finite impulse response. A cantilever structure is fabricated in one arm of the Mach–Zehnder interferometer（MZI） to act as an amplitude modulator. The phase shift feature of waveguide is analyzed with the optical pump power, and five typical waveforms are demonstrated with the manipulation of optical force. Unlike other pulse shaper schemes based on thermo–optic effect or electro–optic effect, our scheme is based on a new degree of freedom manipulation, i.e., optical force, so no microelectrodes are required on the silicon chip,which can reduce the complexity of fabrication. Besides, the chip structure is suitable for commercial silicon on an insulator（SOI） wafer, which has a top silicon layer of about 220 nm in thickness.     

基于水分掺杂的高场非对称波形离子迁移谱检测硫化氢的研究

高场非对称波形离子迁移谱(FAIMS)是一种芯片级高灵敏度快速分析检测技术,其在大气压环境下工作的特点使之受环境影响明显,其中气体的湿度是显著影响因素,湿度的变化可引起迁移区离子反应机理以及迁移过程的变化。该文研究了干燥条件下痕量硫化氢的定量检测方法,确定了DF=33%时的检测线性范围与回归方程。利用PTFE管渗透作用,设定水浴温度为40～90℃,考察了不同含量水分对FAIMS检测硫化氢的影响。通过考察不同湿度下硫化氢的FAIMS特征谱图以及特征离子峰,研究了掺杂水分对于硫化氢谱峰峰值、补偿电压以及检测分辨率的影响。结果表明,FAIMS对于硫化氢的检测谱图清晰可见,能够准确定位其特征离子峰。随着气体中水分增多,不同分离电场下的产物离子峰峰值增大,说明湿度增大在一定程度上提高了灵敏度,DF=35%时的检出限为1.43×10~(-3) mg/m~3。     

核磁共振任意波形发生器的研制

任意波形发生器（又叫函数发生器）作为一种通用的信号源,在物理、电子、计算机等领域有着广泛的应用. 本文提出了一种不依赖PC机总线的、完全独立的、 可用于低场磁共振成像的多用途任意波形发生器（Arbitrary Waveform Generator, AWG）设计方案,围绕着这种方案,研制了80 MHz通用磁共振任意波形发生器. 并提供了实际测试数据和成像实验结果,对研制情况和实验结果进行了总结和讨论.     

Quadrature methods for highly oscillatory linear and nonlinear systems of ordinary differential equations: part I

This work presents methods of efficient numerical approximation for linear and nonlinear systems of highly oscillatory ordinary differential equations. We show how an appropriate choice of quadrature rule improves the accuracy of approximation as the frequency of oscillation grows. We present asymptotic and Filon-type methods to solve highly oscillatory linear systems of ODEs, and WRF method, representing a special combination of Filon-type methods and waveform relaxation methods, for nonlinear systems. Numerical examples support this paper. Dedicated to the memory of Rudolf Khanamiryan. AMS subject classification (2000)  65L05, 34E05, 34C15     

一种可调制的连续光谱点光源

短弧氙灯是一种发光强度高,具有从紫外到红外的连续光谱的点光源。本文介绍交流供电的短弧氙灯光源,用两电极短弧氙灯实现三电极短弧氙灯性能的方法。给出了用一个系统满足各种不同发光强度、不同调制波形、不同调制频率的要求,以及在制造和使用过程中应注意的事项。     

Decomposition of Benzene in Air in a Plasma Reactor: Effect of Reactor Type and Operating Conditions

The decomposition of benzene was carried out in two types of plasma reactors packed with BaTiO₃ pellets: one reactor had two stainless steel electrodes (SUS reactor), and the other reactor had a glass layer between two concentric electrodes (GL reactor). The decomposition efficiency and the suppression of formation of N₂O and NO_x were greater in the GL reactor than in the SUS reactor. In contrast, the suppression of O₃ formation and the oxidation to CO_x in the SUS reactor were superior to those in the GL reactor. The effect of wa eform and frequency of applied ac power was in estigated for each reactor.     

模拟回火马尔可夫链蒙特卡罗全波形分析方法

针对传统的全波形分析方法不能快速自动处理全波形数据的缺点,提出了一种模拟回火马尔可夫链蒙特卡罗全波形分析法,用于求解全波形数据中的波峰数和峰值位置等参量.该方法采用Metropolis更新策略求解波峰数量和噪声两个参量,以达到快速求解的目的;而峰值位置和波峰幅值则采用改进的模拟回火策略求解,通过添加的主动干预回火步骤实现对参量更新过程的有效探测,以满足对速度或运算收敛性的要求.模拟回火马尔可夫链蒙特卡罗全波形分析方法以马尔可夫算法为基础,仍保持马氏链的收敛性,从而保证本方法具有良好的鲁棒性,实现对全波形数据的自动化处理.     

Controlling waveform of light pulse with light in optical fibers

We present our experimental demonstration of controlling waveform of a signal pulse by using two beams of continuous wave (CW) generated by stimulated Brillouin scattering (SBS) in optical fibers with different frequencies. Waveform of the signal pulse is modulated in an “all-optical” way according to total input power. This method is only suitable for light pulse with nanosecond width. We provide a new method for controlling light with light.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.